Sina OEM consuetudo vel vexillum immaculatum ferro camlock byamissa cera obsideri mittentes processus.
Chalybs immaculata minimum chromium contentum 10.5% habet, eoque magis resistit ad ambitus liquidi corrosivi et oxidationis.Sed hoc non est absolutum.Repugnantiae ferri incorruptae fusurae sunt "corrosio-resistentes" cum in ambitibus liquidis et vaporibus adhibitis infra 1200°F (650°C) et "calor-resistentes" cum supra hanc temperiem adhibitae sunt.AISI 316 ferrum est austeniticum immaculatum, quod late pro iactationibus collocandis adhibetur.
Facultates Investment Iactandi Foundry:
• Max Size: 1,000 mm × 800 mm × 500 mm
• Pondus dolor: 0.5 kg - 100 kg
• Capacitas annui: 2,000 tons
• Materiae vinculi ad Testam Aedificium: Silica Sol, Vitrum Aquarum et earum mixtiones.
• Tolerantiae: Ad petitionem.
Commoda Investment Iactandi Components:
- Superficies optima et lenis meta
- Stricta tolerantiae dimensiva.
- Complexae et intricatae figurae cum consilio flexibilitate
- Facultas igitur tenuiores ejiciendi parietes tenues component
- Lata selectio metallica et admixtionum (ferrarum et non-ferrarum)
— Draft in fingit consilio non requiritur.
- Reducere necessitatem machinis secundae.
— Humilis materia perditio.
| Materiae forInvestment IactareRMC ad aliquid aliquet pretium | |||
| Categoria | Sina Gradus | US Gradus | Germania Grade |
| Ferritic Steel | 1Cr17, 022Cr12, 10Cr17; | 430, 431, 446, CA-15, CA6N, CA6NM | 1.4000, 1.4005, 1.4008, 1.4016, GX22CrNi17, GX4CrNi13-4 |
| Martensitic Steel | 1Cr13, 2Cr13, 3Cr13, 4Cr13; | 410, 420, 430, 440B, 440C . | 1.4021, 1.4027, 1.4028, 1.4057, 1.4059, 1.4104, 1.4112, 1.4116, 1.4120, 1.4122, 1.4125. |
| Austenitic immaculatam ferro | 06Cr19Ni10, 022Cr19Ni10; 06Cr25Ni20, 022Cr17Ni12Mo2, 03Cr18Ni16Mo5 | 302, 303, 304, 304L, 316, 316L, 329, CF3, CF3M, CF8, CF8M, CN7M, CN3MN | 1.3960, 1.4301, 1.4305, 1.4306, 1.4308, 1.4313, 1.4321, 1.4401, 1.4403, 1.4404, 1.4405, 1.4406, 1.4408, 1.4409, 1.4435, 1.4436, 1.4539, 1.4550, 1.4552, 1.4581; 1.4582, 1.4584; |
| Praecipitatio Hardening Diver | 05Cr15Ni5Cu4Nb, 05Cr17Ni4Cu4Nb | 630, 634, 17-4PH, 15-5PH, CB7Cu-1 | 1.4542 |
| Duplex Steel | 022Cr22Ni5Mo3N, 022Cr25Ni6Mo2N | A 890 1C, A 890 1A, A 890 3A, A 890 4A, A 890 5A; A 995 1B, A 995 4A, A 995 5A, 2205, 2507 | 1.4460, 1.4462, 1.4468, 1.4469, 1.4517, 1.4770 |
| Princeps Mn Steel | ZGMn13-1, ZGMn13-3, ZGMn13-5 | B2, B3, B4 | 1.3802, 1.3966, 1.3301, 1.3302 |
| Instrumentum Steel | Cr12 | A5, H12, S5 | 1.2344, 1.3343, 1.4528, GXCrMo17, X210Cr13, GX162CrMoV12 |
| Calor resistens Steel | 20Cr25Ni20, 16Cr23Ni13; 45Cr14Ni14W2Mo | 309, 310, CK 20, CH20, HK30 | 1.4826, 1.4828, 1.4855, 1.4865 |
| Nickle-basi Alloy | PRAECEL-C, PRAECEL-X, SUPPER22H, CW-2M, CW-6M, CW-12MW, CX-2MW, HX(66Ni-17Cr), MRE-2, NA-22H, NW-22, M30C, M-35. -1, INCOLOY600; INCOLOY625 | 2.4815, 2.4879, 2.4680 | |
| aluminium Alloy | ZL101, ZL102, ZL104 | ASTM A356, ASTM A413, ASTM A360 | G-AlSi7Mg, G-Al12 |
| Aeris Alloy | H96, H85, HPb63-3; HPb59-1, QSn6.5-0.1, QSn7-0.2 | C21000, C23000, C27000, C34500, C37710, C86500, C87600, C87400, C87800, C52100, C51100 | CuZn5, CuZn15, CuZn35, CuZn36Pb3, CuZn40Pb2, CuSn10P1, CuSn5ZnPb, CuSn5Zn5Pb5 |
| Cobaltum basi Alloy | UMC50, 670, Grade 31 | 2.4778 | |
| INVESTMENT IACTATIO TOLERATIO | |||
| Unciarum | Millimeters | ||
| Dimension | tolerantia | Dimension | tolerantia |
| Ad 0.500 | ±.004" | Ad 12.0 | ± 0.10mm |
| 0.500 ad 1.000" | ±.006" | 12.0 ad 25.0 | ± 0.15mm |
| 1.000 ad 1.500" | ±.008" | 25.0 ad 37.0 | ± 0.20mm |
| 1.500 ad 2.000" | ±.010" | 37.0 ad 50.0 | ± 0.25mm |
| 2.000 ad 2.500" | ±.012" | 50.0 ad 62.0 | ± 0.30mm |
| 2.500 ad 3.500" | ±.014" | 62.0 ad 87.0 | ± 0.35mm |
| 3.500 ad 5.000" | ±.017" | 87.0 ad 125.0 | ± 0.40mm |
| 5.000 ad 7.500" | ±.020" | 125.0 to190.0 | ± 0.50mm |
| 7.500 ad 10.000" | ±.022" | 190.0 ad 250.0 | ± 0.57mm |
| 10.000 ad 12.500" | ±.025" | 250.0 ad 312.0 | ± 0.60mm |
| 12.500 ad 15.000 | ±.028" | 312.0 ad 375.0 | ± 0.70mm |
