OEM consuetudo aluminium stannumharenae fusuratestudinem fingunt ejiciendi.
Aluminium et mixturas altae pressionis mori iactu fundi, pressionis humilis iacturae, gravitatis abiectionis, arenae dejectionis, dejectionis ejiciendi et fundendi;perdidit spumam dejectio.Plerumque aluminium offensionum minorum pondus habent sed superficies implicatas structurales et meliores.
Quid Aluminium Alloy Jacimus by Sand Iaculatione Processu:
• Aluminium Alloy in Sinis Latin: ZL101, ZL102, ZL104
• Aluminium Alloy in USA Stardard: ASTM A356, ASTM A413, ASTM A360
• Aluminium Alloy ab aliis Starndards mittite: AC3A, AC4A, AC4C, G-AlSi7Mg, G-Al12.
| Unified | aluminium consociatio | duritia BHN | Ultima fortitudo distrahens, MPa | cede virtus, MPa | Modulus elasticitatis, GPa | Lassitudo fortitudo, MPa |
| A03550 | AA355.0 | 75-105 | 255 | 185 | 70.3 | 69.0 |
| A03600 | AA360.0 | 75.0 | 300 | 170 | 71.0 | 138.0 |
| A03800 | AA380.0 | 80,0 | 317 | 159 | 71.0 | 138.0 |
| A03830 | AA383.0 | 75.0 | 310 | 152 | / | 145.0 |
| A03840 | AA384.0 | 85.0 | 331 | 165 | / | 140.0 |
| A03900 | AA390.0 | 120.0 | 280 | 240 | 81.2 | 140.0 |
| A04130 | AA413.0 | 80,0 | 296 | 145 | 71.0 | 1300 |
| A04430 | AA443.0 | 30-60 | 145 | 48.3 | 71.0 | / |
| A05180 | AA518.0 | 80,0 | 310 | 193 | 69.0 | 160.0 |
Aluminium Alloy Castings Characteres:
• Dejectio fiendi simile est cum fusura ferri, at proprietates mechanicae relativae significantius decrescunt sicut crassitudo muri augetur.
• Muri crassitudo fusurarum non nimis magna esse debet, et ceterae lineamenta structurae his quae de ferro iaciendi sunt similes
• Leve pondus sed complex sistens
• Per kg aluminii fusurae gratuita dejectiones altiores sunt quam fusurae ferreae et ferreae.
• Si mori processum emissionis produceretur, forma et exemplar multo pluris esset quam alii processus emittentes.Ergo mori aluminium dejectiones aptiores fore ad flatura magnae quantitatis exigentiae.
| Typical Chemical Composition of Investment Projecting Aluminium Alloy by North American Specifications | ||||||||||||||
| Alloy Grade | Specification | Al | Cu | Si | Zn | Mg | Cr | Fe | Mn | Ti | Ag | Be | Ni | P |
| A356-T6 | AMS 4218 | Bal | 0.20 | 6. 5 - 7. 5 | 0.10 | 0.25-0.45 | - | 0.20 | 0.10 | 0.20 | - | -- | - | - |
| A 357 | AMS 4219 | Bal | 0.20 | 6. 5 - 7. 5 | 0.10 | 0.40-.70 | - | 0.20 | 0.10 | 0.04-0.20 | - | 0.04-0.07 | - | - |
| F 357 | AMS 4289 | Bal | 0.20 | 6.5-7.5 | 0.10 | 0.40-.70 | - | 0.10 | 0.10 | 0.04-0.20 | - | 0.002 | - | - |
| E 357 | AMS 4288 | Bal | - | 6.5-7.5 | 0.10 | 0.55-0.60 | - | 0.10 | 0.10 | 0.10-0.20 | - | 0.002 | - | - |
| A201 | AMS 4229 | Bal | 4.0-5.0 | 0.05 | - | 0.15-0.35 | - | 0.10 | 0.20-0.34 | 0.15-0.35 | 0.40-1.0 | - | - | - |
| C355 | AMS 4215 | Bal | 1.0-1.5 | 4.5-5.5 | 0.10 | 0.40-0.60 | - | 0.20 | 0.10max | 0.20 | - | - | - | - |
| A206 | AMS 4235 | Bal | 4.2-5.0 | .05max | 0.05max | 0.20-0.35 | - | 0.10ma | 0.20-0.50 | 0.15-0.30 | - | - | 0.5max | - |
| B206 | Bal | 4.2-5.0 | .05max | 0.05max | 0.15-0.35 | - | 0.10max | 0.20-0.50 | 0 1 0 | - | - | 0.5max | - | |
